Choose a language.

Masterclock.com can now be viewed in other languages thanks to Google Translator. The translation is computer generated and at times may be less than perfect. We hope that you appreciate that this is an experiment to determine the best way to reach our customers globally and that the translation at times may not make sense.

...Time Code Products : GPS200

GPS200 Time Code Generator Synched to GPS
GPS200 Time Code Generator Synched to GPS GPS200 Time Code Generator from Rear CE logo

The GPS200 generates Time Code with atomic clock accuracy by sychronizing to GPS satellites.


GPS pre-amplified antenna, cable, hardware and power supply included.

pdf Data Sheet
pdf User Manual
Catalogs

TIME REFERENCE

  • When synchronized : Atomic clocks in GPS satellites - long term accuracy same as GPS atomic clock
  • After initial synchronization and (if) upon loss of GPS signal the GPS 200 will revert to an internal calibrated oscillator and typically maintain accuracy of < 150 ms per day.
  • Accuracy when not synchronized: internal quartz crystal (.01%)


OUTPUTS

  • SMPTE Time Code
    SMPTE, EBU or Film, 24 - 25 or 30 FPS, level - 2 Vpp
  • IRIG-B Time Code
    IRIG-B - 1 kHz modulated, level - 5 Vpp
    IRIG-B - unmodulated, single ended 5 V
    IRIG-B - unmodulated / differential 5V
  • Relay Closure on Alarm Condition
  • PPS (Pulse Per second)
    5 V-TTL, Accuracy ± 1 us (when synchronized)
  • RS-232/ASCII
    Time code information available via RS-232
    Kinemetrics / Truetime serial protocol output option
  • DATE
    Date information is included in user bits

CONNECTORS

  • Output - DB-9 female - DB-9 to BNC adapter included
  • Power plug - 2mm male power jack
  • Antenna - SMA female

PHYSICAL

  • Size - 1.5 x 4.1 x 5.5 (inches) - 3.8 x 10.4 x 14 (cm)
  • Weight - 18 oz - 500 g (approximate w/o ps)
  • Power supply (approximate) 12 oz - 340g
  • Cover - pearl white aluminum
  • Front/rear panel - clear anodized aluminum

POWER

  • 12 VDC external wall mount supplied, UL & CE listed
  • 115/230, 50/60 Hz
  • Supplied with US, Euro-plug, British or AUS/NZ - others optionally available

COMPLIANCE

Standard Package


Basic Package

  • GPS200
  • Basic Pre-amplified GPS Antenna with 16' - 5m attached cable
  • BNC9 Adapter
  • Wall-mount power supply
  • Instruction manual on CD

Receiver Only

  • GPS200
  • BNC9 Adapter
  • Wall-mount power supply
  • Instruction manual on CD
  • GPS200
  • Wall-mount power supply
  • BNC9 (9-pin serial to BNC) Adapter
  • Instruction manual on CD

Shipping Information: package weights, sizes and codes