(800) 940-2248  

Stylized Line Background Image

RC1000 Dual-Channel Production Timer

Dual 6-Digit Display Panels, independent timing channels

Masterclock's RC1000 Dual Channel Production Timer
  • 2 independent timing channels
  • 6-digit dual displays can show HH:MM:SS or MM:SS:FF
  • Generates SMPTE/EBU (30/25/24fps ndf, 29.7df) & network count packets
  • Locks to SMPTE/EBU, IRIG-B, NTP or internal reference
  • Add or subtract time for quick calculations
  • 20 programmable presets with 6 count sequence chaining
  • 2 GPI inputs & 2 GPI outputs (opto-isolated TTL)
  • Redundant DC & PoE power
  • Replacement for UDT-5700

RC1000 Dual-Channel Production Timer

The RC1000 is a dual-channel up/down production timer for count and control applications. Supporting both network and time code, this versatile and functional device is essentially two counters in one. Counts are entered via a numeric keypad and a new count can be started during production. The six-digit dual displays can show HH:MM:SS or MM:SS:FF. Each channel generates SMPTE/EBU to sync production equipment or to control counts on our TCDS Series digital clocks (or any clock that accepts raw SMPTE/EBU). Each channel can also generate network count packets to control our NTDS Series digital clocks.

Request a Quote

RC1000 Front

RC1000 Back

Reference Documents

SpecificationsRC1000 Dual-Channel Production Timer


  • DB25 - time code I/O, RS232, GPI I/O (DB-25 terminal block adapter included)
  • RJ45 10/100MB - configuration, network communications and PoE power
  • USB - configuration
  • DC input 2.1 mm male jack - power

  • Ethernet timer control packets for NTDS clocks
  • SMPTE time code via BNC
  • Current model max count = 99 hours
  • USB for configuration via WinDiscovery

  • Fully configurable offsets for time zone and DST
  • WinDiscovery configuration and monitoring software included
  • Configure device manually, or via network using WinDiscovery or Telnet/SSH, or through direct connection using USB
  • Supports NTP, DHCPv4, DHCPv6 for automatic network acquisition
  • IPv4, IPv4/IPv6 supported
  • SNMP with custom MIB
  • LED brightness control

  • Dual PoE and DC power
  • PoE (48VDC, IEEE 802.3af)
  • DC input 9-28VDC (24VDC wall-mount power supply with locking DC plug included)

  • Temperature: 0 to 60°C
  • Humidity: Up to 90% (non-condensing)

  • Size: 5.2x8x1.75 in (13.2x20.3x4.4 cm)
  • Weight: 1.8 lb (0.82 kg)
  • Black powder coated steel chassis
  • Rubber non-slip feet for tabletop use

  • FCC, ROHS, CE Marked, ANSI

Request a Quote

Related Products
Related Articles

Presentation by John Clark, CEO & Dr. Demetrios Matsakis, Chief ScientistTime Behind and Beyond the Clock

Read Article