Dual-Channel Production Timer

The RC1000 is a dual-channel up/down production timer for count and control applications. Supporting both network and time code, this versatile and functional device is essentially two counters in one. Counts are entered via a numeric keypad and a new count can be started during a current count or after it has stopped. It can be programmed with 20 count presets, or counts can be calculated and entered during production. The six-digit dual displays can show HH:MM:SS or MM:SS:FF. Each channel generates SMPTE/EBU to sync production equipment or to control counts on our TCDS Series digital clocks (or any clock that accepts raw SMPTE/EBU). Each channel can also generate network count packets to control our NTDS Series digital clocks.

RC1000 Dual-Channel Production Timer

Features

  • 2 independent timing channels

  • 6-digit dual displays can show HH:MM:SS or MM:SS:FF

  • Generates SMPTE/EBU (30/25/24fps ndf, 29.7df) & network count packets

  • Locks to SMPTE/EBU, IRIG-B, NTP or internal reference

  • Add or subtract time for quick calculations

  • 20 programmable presets with 6 count sequence chaining

  • 2 GPI inputs & 2 GPI outputs (opto-isolated TTL)

  • Redundant DC & PoE power

  • Replacement for UDT-5700


Specifications

Connectors

  • DB25 – time code I/O, RS232, GPI I/O (DB-25 terminal block adapter included)

  • RJ45 10/100MB - configuration, network communications and PoE power

  • USB - configuration

  • DC input 2.1 mm male jack - power

Output  

  • Ethernet timer control packets for NTDS clocks

  • SMPTE time code via BNC

  • Current model max count = 99 hours

  • USB for configuration via WinDiscovery

Other Features

  • Fully configurable offsets for time zone and DST

  • WinDiscovery configuration and monitoring software included 

  • Configure device manually, or via network using WinDiscovery or Telnet/SSH, or through direct connection using USB

  • Supports NTP, DHCPv4, DHCPv6 for automatic network acquisition

  • IPv4, IPv4/IPv6 supported

  • SNMP with custom MIB

  • LED brightness control

Power

  • Dual PoE and DC power

  • PoE (48VDC, IEEE 802.3af)

  • DC input 9-28VDC (24VDC wall-mount power supply with locking DC plug included)

Physical  

  • Size: 5.2x8x1.75 in (13.2x20.3x4.4 cm)

  • Weight: 1.8 lb (0.82 kg)

  • Temperature: 0 to 60 C

  • Humidity: Up to 90% (non-condensing)

  • Black powder coated steel chassis

  • Rubber non-slip feet for tabletop use

Compliance  

  • FCC, ROHS, CE Marked, ANSI